How to Install a Beverage Dispenser

Installing a commercial beverage dispenser is not difficult if you have carefully chosen a site for the dispenser and then make sure that you follow a few simple steps. If you take time to read these steps completely before you start, then you are sure to have a successful installation.

1. First: How to choose a good site

   A good site is one that has ample space for the dispenser plus room for clearance, about 150mm. This allows proper air circulation to keep the machine running effectively. Additional requirements for the space are a flat surface that is fixable and avoids direct sunshine or heat. The next step is to confirm power supply requirements.

2. Second: How to confirm power supply requirements

   The power supply must adhere to the requirements in the operation manual. Make sure the cross section of cable is not too thin or too long by checking the manual for specification requirements. Proper voltage is necessary. The supply also requires reliable grounding. In addition to checking the power supply, make sure the socket that the machine connects to is in a fixed position and has a safety fuse attached. You are then ready to make some adjustments.

3. Third: How to adjust dispenser for adequate beverage flow

   In order for the beverage to flow freely from the dispenser, you need to have the front section positioned lower than the back. You can adjust the feet on the dispenser bottom to accomplish this. When you have properly followed these steps, your dispenser installation is complete, and the unit can serve your needs well for years to come.